Packaging
| Selling Units: | Single item |
|---|---|
| Single package size: | 51X36X47 CM |
| Single gross weight: | 14.0 KG |
Product Description
Subli-Mate Package-Cap Press Machine
DIY personalized advertising what packages ,you can make your own most proud photo . THe unique personalized affection which will reflect your personality and achieve unexpected advertising result .Products inside the package are carefully selected . With generous , simple and elegant design , you would retain full creative picture. The package is suitable for gift companies,advertising companies , gift shop and so on . The operation of the machine is simple ,streamlined packaging design will save you much transportation costs.
| No. | Product Name | Qty | Price$ | Packingm²/kg |
| 1 | Cap press machine | 1set | Packages Price $149 | 14KG/0.0814 |
| 2 | Color cap | 30pcs | ||
| 3 | White cap | 5pcs | ||
| 4 | 100ML Sublimation ink | 6pcs | ||
| 5 | Sublimation paper | 100pcs | ||
| 6 | Thermal Tape | 5mm*33m | ||
| 7 |
Subli-Mate solution
(USB)
|
1pcs | ||
| 8 | User manual | 1pcs | ||
| 9 | Universal Charger | 1pcs |
| Machine details: | |||
| ♦ Machine Type:Manual , Clamshell | |||
| ♦ Print size: 7*15cm | |||
| ♦ Opening Angle: 50 degrees | |||
| ♦ Gas Spring Control: Yes | |||
| ♦ Voltage: 120V/ 220V | |||
| ♦ Power: 1800W | |||
| ♦ Time Range: 0-999 sec | Print time: 150s | ||
| ♦ Maximum Temp: 220 C | Printing temperature: 180℃ | ||
| ♦ Temperature Accuracy: ±0.5% | |||
| ♦ Packing Size: 45*37*58cm | |||
| ♦ Gross Weight: 14kg | |||
| Maintenance matters: | |||
| 1. Pressure: if the pressure is not enough or too much, please regulator screw loose, then turn the nut adjustable pressure regulator, adjustable regulator after tighten the locking screw; | |||
| 2. Temperature: When the device reaches the set temperature heating plate does not heat, check the thermostat and the thermocouple wiring for damage (thermostat at 0 °C about 15 minutes to reach 180 °C); | |||
| 3. Time: Set the alarm time is reached without (buzzer does not ring) or alarm continuously (buzzer does not stop), check the tail inside the micro-switch contact point is from the moderate, if often adjust to the appropriate guide location; | |||
| 4. Such as quality problems, please contact us. |
Adjustments:
1, pressure: rotary printing units, adjusting the vertical position of the pressure to increase or decrease;
2, the temperature and time adjustment method is as follows:
Temperature setting: press SET to set key once, the window displays SP, press the key addition or subtraction key to set temperature, the setup is complete press SET to return to the interface;
Time setting: Press the SET key twice to set the window displays SF, reduced by the addition key or key to set the time, set the complete press SET to return warming interface
Quality Control on Finished Machine:
All heat presses are strictly tested under the following procedures before shipping out.
1) Turn on the machine, let it heating up to 200 degree Celsius.
2)Keep the temperature stay at 200 degree Celsius for at least 20 minutes
Demonstration video : https://www.youtube.com/watch?v=kkvDDfmkBCw
